The sauna is automatically switched off at the set time. If exceeded, all outputs are switched off, except for the output (Ssd). The temperature required to start the fan when in drying phase.įan duration after reaching the drying phase temperature (Dryϑ). Pulse when target temperature is reached.ĭeviation current temperature to seat temperature (if the input current bench temperature (ϑb) is not used). Pulse when the current temperature exceeds the value set in parameter (Ssdϑ). On as long as drying and airing are active. On as long as sauna and drying phase are active. (e.g Child lock, cleaning)Ĭontrol via user interface is still possible. If no presence is detected, the sauna will shutdown automatically after the duration set in parameter (Ssdt).ĭisables inputs (Tg), (Fan), (St) when On. If connected, the bench temperature is used as current temperature. The door state is only used for display in the user interface! The fan can only be switched on when the sauna is On.Īctivates the sand timer for the duration set in parameter (Std).Įach subsequent pulse on the input restarts the timer. Toggles between Sauna On, Heating, Drying, Airing, Sauna Off. With this Function Block a sauna can be optimally automated.Īll standard Sauna heaters can be controlled (switching of the heating elements, as well as analog control via 0-10 V signal).Īlso integrated in the module is an hourglass function, fan and post-drying, as well as a safety shutdown, if you forget to switch off the heater.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |